Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateFast, Reliable Mold Remediation Across Crowley
Mold remediation in Crowley typically runs $1,800 – $6,500 depending on how far the moisture has traveled, and most jobs are fully scoped within 48 hours of your first call. If you’re seeing discoloration on baseboards, smelling something musty near the utility room, or dealing with a recent water event in a Crowley slab home, call (682) 703-9856 and we’ll send a credentialed technician to map the moisture before it spreads further. We know the subdivisions off FM 1187, the older tracts east of the BNSF rail line, and the newer builds west of Crowley Road, because we work them every week.
Our Mold Remediation team treats Crowley homes with one rule: find the tide mark, dry past it, and leave the house cleaner than we found it. No pressure, no vague estimates. A written price comes before any equipment rolls in.
Why Tidemark Water Damage Fort Worth Is Crowley’s Preferred Mold Remediation Company
Crowley homeowners call us because we speak the local language of clay-heavy slabs, spec-home plumbing failures, and storm-driven moisture that shows up weeks after the hail leaves. Rick Sumner leads our Fort Worth team, and the standard he set is simple: explain before acting, name what will be protected and how, and never start a job without a written price the homeowner has signed off on. That matters in a city where mold often hides behind baseboards for weeks before anyone sees it.
Our technicians are IICRC-, RIA-, and IFA-credentialed, background-checked, and uniformed. Shoe covers go on at the door. Drop cloths cover the floor before the first piece of equipment comes in. We use professional-grade drying equipment from Phoenix, XPOWER, and B-Air, and we log every moisture reading so you see the numbers dropping, not just hear us say it’s drying. When the crew leaves, you get a photo of the clean-up, so there’s no wondering what happened behind the containment barrier.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, which means a live person answers the phone at 2 a.m. or 2 p.m. and a Crowley crew is usually on site within hours, not days.
Restoration work we handle
Mold Remediation Services in Crowley
Mold Remediation Services in Crowley start with moisture mapping, not guesswork. On flat, clay-heavy prairie land, water doesn’t always pool where you can see it. It travels under slab penetrations, wicks up into drywall, and feeds mold in wall cavities long before discoloration appears. That’s why we test, map, and contain before we remove anything. A typical partial-room remediation in a Crowley ranch runs $1,800 – $3,400. A whole-home job with multiple affected rooms and pack-out runs $5,000 – $6,500.
When stormwater seeps through slab penetrations after a heavy downpour, the fix isn’t just spraying antimicrobial on visible spots. We find the moisture source, repair it, remove affected drywall and insulation, treat the cavity, and dry past the tide mark so mold doesn’t return in six weeks.
Containment and Air Quality
We set up negative-air containment around the work area before pulling down drywall or pulling up carpet. That keeps mold spores from drifting into your living room, your kids’ bedrooms, or your kitchen during the job. HEPA filtration runs throughout the remediation, and we monitor air quality readings until they’re back to normal for a Crowley home.
Moisture Mapping and Hidden Cavity Drying
On slab foundations, the first signs of mold are often invisible. A musty smell near the utility room, a faint tide mark behind the washer, warped baseboards that feel damp to the touch. We use moisture meters to trace exactly where water traveled, then dry those cavities with Phoenix dehumidifiers and XPOWER air movers until readings drop below 5% MC. That’s the difference between remediation that holds and a call-back in three months.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Professional Mold Removal in Crowley
Professional Mold Removal in Crowley is not a spray-and-wipe job. It’s removing the food source, the moisture, and the mold itself, then verifying the cavity is dry enough that regrowth fails. Most jobs involve cutting out affected drywall, removing contaminated insulation, treating framing with antimicrobial, and running professional drying equipment until moisture meters confirm the space is dry. Homeowners often ask if we can save the drywall. Sometimes yes, when surface mold is caught early and the backing isn’t saturated. More often, on Crowley slabs where water wicked up from below, the drywall has to go.
Every job begins with a written scope. You see the price, the steps, the equipment, and the timeline before we start. No surprises on the final invoice. That’s a Tidemark non-negotiable.
Black Mold Remediation
Black mold in Crowley homes usually follows prolonged moisture from slab leaks, stormwater intrusion, or hidden plumbing failures. We test to identify the species, contain the area under negative pressure, remove affected materials, and treat cavities with antimicrobial. Families with kids and pets especially need this done right, because incomplete removal leaves spores circulating in HVAC systems.
Crawl Space and Enclosed Cavity Treatment
Two-story tract homes and slab-on-grade ranch houses each have their own failure points in Crowley. Crawl spaces trap humidity during our hot, humid summers, feeding mold on floor joists and subflooring. We treat those cavities with antimicrobial, improve ventilation where possible, and install moisture barriers when the home needs one. We’ll name what we’re protecting and how, before we touch anything.
Trusted Brands We Service in Crowley
We run Phoenix LGR dehumidifiers, XPOWER air movers, and B-Air filtration units on Crowley jobs every week. These are the same professional-grade machines used by leading restoration specialists, and we keep replacement filters, hoses, and parts stocked for fast turnaround on Crowley calls. When a dehumidifier needs a filter swap mid-job, we don’t wait on a supply truck from Dallas. We send a tech from the metro office with what’s needed, same day. For homeowners, that means fewer days of equipment noise, faster drying, and a clear photo log of equipment placement and readings before we pack up.
Common Mold Remediation Problems We See in Crowley Homes
- Waiting for visible mold before testing. On Crowley’s clay-heavy slabs, moisture wicks up through slab penetrations for weeks before discoloration appears. By the time you see it, remediation scope has often doubled.
- Skipping moisture mapping after a summer hail storm. Wind-driven rain enters through damaged gable vents into attic and crawlspace areas. Techs who don’t map hidden cavities miss mold behind baseboards, and that leads to warranty call-backs.
- Treating west-of-tracks homes like east-side cast-iron failures. Crowley is split between Tarrant and Johnson counties, each with different permit and inspection histories. Some 1990s tracts have flexible drain lines that crack at slab corners, sending sewage-laced backflow into wall cavities. Those need category 3 water containment and pack-out, not just drying.
- Ignoring drainage grading on flat prairie lots. Minimal grading means stormwater pools against slab edges and seeps under the foundation. Mold follows weeks later, even if you never saw standing water inside the house.
See the difference
Before
After
Before
After
Before
AfterPricing for Mold Remediation in Crowley, TX
Mold remediation in Crowley runs $1,800 – $6,500 for most residential jobs. Mold inspection and testing alone runs $350 – $800. Crawl space treatment runs $1,200 – $3,000 depending on access and square footage. Moisture and humidity control installations, including dehumidifier systems, run $900 – $2,400. Air quality restoration after a remediation job runs $400 – $1,200. What moves the price: how many rooms, whether pack-out is needed, whether sewage backflow is present (category 3 water), and how long the moisture has been sitting. Larger two-story homes on the west side of Crowley typically land at the higher end because of HVAC duct runs and cavity complexity. Every quote is written, itemized, and agreed to before work starts. Call (682) 703-9856 for a free estimate.
We Also Serve Cities Near Crowley
Our crews serve Mold Remediation in Crowley and regularly work neighboring cities including Burleson, Arlington, Mansfield, and Fort Worth. If you’re just outside Crowley city limits, we can usually reach your home within the same response window.
Serving Crowley, TX - Our Local Coverage Area
We’re based in the Crowley area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Mold Remediation in Crowley
Mold can begin forming within 24 to 48 hours after stormwater or sewage backs up into a slab foundation in Crowley, especially during our hot, humid summers when indoor temperatures speed up growth. The clay-heavy soil under the slab holds moisture against the concrete, and that dampness wicks up through penetrations into wall cavities and flooring. If you’ve had a drain back up, call us the same day. The sooner we start moisture mapping and drying, the smaller the remediation.
Call (682) 703-9856 and we’ll walk you through what to do in the first hour while we dispatch a technician to Crowley.
Mold remediation itself doesn’t change much across the county line, but what we look for does. Homes in the Johnson County portion of Crowley were often permitted under different inspection schedules, and some 1990s tracts there have flexible drain lines that crack at slab corners. Those failures release sewage-laced backflow into wall cavities, which requires category 3 containment and pack-out, not standard drying. On the Tarrant side, we more often see cast-iron drain line failures in older subdivisions east of the BNSF rail line. We check both patterns regardless of address, because the county split means a single Crowley ZIP code can hide two very different plumbing histories.
Call us and we’ll tell you which failure modes your home’s build year and location actually point to.
It rarely looks like sewage at first. It starts as a persistent musty smell near a hallway or bathroom, then baseboards start warping or staining dark along the bottom edge, and sometimes you’ll hear a faint trickle behind a wall. The older subdivisions east of the BNSF rail line in Crowley have cast-iron drain lines under slabs that crack during summer soil shifting. When that happens, sewage backflow saturates the soil and wicks up through the concrete. By the time you see it, the wall cavity is usually involved and needs demolition-style remediation, not a surface cleaning.
We’ve handled that exact pattern many times in Crowley. The fix starts with moisture mapping and ends with a written scope before any wall comes down.
Sometimes, yes. If mold is caught early and the drywall backing isn’t saturated, we can often treat the surface, clean the cavity, and dry it in place using Phoenix dehumidifiers and XPOWER air movers. But on slab foundations where moisture has wicked up from below, the drywall usually has to go. The gypsum acts like a wick, and once mold has colonized the backside, no surface treatment will stop regrowth. We always show you the moisture readings and the scope before we cut. If the drywall can be saved, we save it. If it can’t, you’ll know why before the saw comes out.
Hail cracks or dislodges gable vents and roof vent covers, and wind-driven rain from spring storms enters the attic through those openings. In two-story tract homes, that water soaks insulation, drips onto second-floor ceiling drywall, and sometimes runs down wall cavities behind baseboards. The mold often shows up weeks later, long after the hail claim was filed. If your Crowley home took hail damage, schedule a moisture mapping inspection even if the roof looks fine from the ground. Finding hidden moisture early is the difference between a small drying job and a full remediation.
Call (682) 703-9856 and we’ll inspect the attic penetrations before mold has a chance to establish.
Ready to Get the Mold Out of Your Crowley Home?
If you’ve got a musty smell, visible growth, or a recent water event in a Crowley home, don’t wait for it to spread behind the walls. Call Tidemark Water Damage Fort Worth at (682) 703-9856 and Rick Sumner’s team will get a credentialed technician to your door, map the moisture, and hand you a written estimate before any equipment comes off the truck. Shoe covers on, drop cloths down, and a photo of the clean-up before we leave. That’s how we work in Crowley.
Written by Rick Sumner, Owner at Tidemark Water Damage Fort Worth.