Water damage drying
Fire & smoke cleanup
Mold remediation
Storm response
Sewage cleanup
ReconstructionFree visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Get your free estimateRestoration work we handle
See the difference
Before
After
Before
After
Before
AfterHow Much Does Mold Remediation Cost in Fort Worth?
Mold remediation in Fort Worth typically costs between $1,800 and $6,500 for most residential jobs, with the average homeowner spending around $3,400 in 2026. Small, contained problems like a bathroom ceiling patch run $500 to $1,500, while a full crawl space or attic job with structural drying can reach $9,000 to $15,000. Those numbers reflect what we see across Tarrant County neighborhoods like Wedgwood, Ryan Place, and North Richland Hills every week.
You should know the written number before anyone picks up a tool. That’s not a luxury here at Tidemark Water Damage Fort Worth. It’s how we’ve worked since Rick Sumner founded this location in 2006, and it’s the standard behind the Cedarwell Care Promise: a price on paper, pet-safe products, and a 365-Day Done Right Promise that follows every job.
Key Takeaways: Fort Worth Mold Remediation Pricing
- Average residential mold remediation in Fort Worth: $3,400 (range: $1,800 – $6,500 for typical jobs)
- Small, isolated outbreaks (bathroom, window sill, closet): $500 – $1,500
- Crawl space or attic remediation with full containment: $4,000 – $15,000
- Testing alone: $250 – $600 for a basic air sample or swab kit; $800 – $1,500 for a full inspection with multiple samples
- Most Fort Worth homes have one of three molds: Cladosporium, Aspergillus, or Stachybotrys (often called black mold)
- Insurance covers mold remediation only when it traces to a covered water event, like a burst pipe, and even then, coverage caps are common
- Tidemark gives you a written price before work starts. Always. Call (682) 703-9856 for a free estimate.
Mold Remediation Cost Breakdown (2026)
Here’s the line-by-line picture for Fort Worth. These are real ranges we’ve quoted on jobs from Fairmount bungalows to McMansions in Walsh Ranch. Every figure assumes a licensed, insured remediation company, not a handyman with a bleach bottle.
| Service Component | Typical Cost in Fort Worth | What It Includes |
|---|---|---|
| Mold inspection and testing | $250 – $600 (basic); $800 – $1,500 (full) | Visual inspection, moisture mapping, air or surface samples, lab analysis |
| Containment setup | $400 – $1,200 | Plastic sheeting (6-mil), negative air pressure, sealed doorways, HEPA-filtered exhaust |
| Mold removal (per sq ft of affected area) | $15 – $32 / sq ft | HEPA sanding, wire brushing, dry-ice blasting on hard surfaces, HEPA vacuuming |
| Demolition and disposal | $500 – $3,000 | Removal of drywall, insulation, carpet, or cabinetry that can’t be saved; bagged and disposed |
| HEPA air scrubbing (per day) | $150 – $350 / day | Commercial air scrubber rental and operation; often 2 – 3 days for the average job |
| Antimicrobial treatment / sealant | $300 – $900 | EPA-registered fungicide and mold-resistant sealant on affected framing and drywall |
| Structural drying | $400 – $2,000 | Dri-Eaz and Phoenix dehumidifiers, air movers, moisture verification |
| Repair / reconstruction | $800 – $8,000+ | New drywall, paint, insulation, carpet, or trim after remediation is done |
What moves a number up or down in the Fort Worth market? Square footage is the obvious lever. A 25-square-foot patch in a guest bathroom ceiling might run $800. That same mold type, but covering 300 square feet across a utility room and hallway, lands closer to $5,500 because you’re now paying for full containment, longer HEPA scrubbing, and demolition of drywall that mold has already colonized.
Location inside the house matters too. Attic jobs in older Fort Worth homes, especially those with original cedar shake or tile roofs, tend to run higher because access is tight and ventilation problems are often built into the house. Crawl space remediation under pier-and-beam homes in Arlington Heights or Mistletoe Heights costs more than slab-foundation work simply because crews spend more hours working in confined, humid conditions.
The type of mold matters less than people think. The remediation process is nearly identical whether it’s Cladosporium or Stachybotrys. What actually changes the quote is how long the moisture source has been active and whether the mold has worked its way into framing, insulation, or HVAC ductwork. A leak that’s been running for three weeks behind a wall in a Benbrook home is a different job than surface mold on a bathroom ceiling that’s been there for a month.
What Affects Mold Remediation Pricing in Fort Worth
Six things move the number on your written estimate. Here’s what we explain to every homeowner before a quote is finalized:
- Square footage of visible and hidden mold. We don’t quote on what we can see. We quote after moisture mapping shows where water traveled. Hidden mold behind baseboards or inside wall cavities in homes from the 1950s and 60s, common in Ridglea and Como, is why final square footage often exceeds what the homeowner first noticed.
- Containment requirements. When mold covers more than 10 square feet, or when a family member has asthma or immune concerns, we build a containment chamber with negative air pressure. That adds $400 to $1,200 to the job, and skipping it is not an option for safety.
- Water source and whether it’s been fixed. Remediation is wasted if the leak is still active. A roofer’s bill in Fort Worth for flashing repairs might be $350 to $900. A plumber’s fix for a slab leak under a southwest Fort Worth home can run $1,200 to $4,000. We coordinate with your trade so the water stops before we start the mold work.
- Demolition and rebuild scope. Some Fort Worth homes have plaster walls, not drywall. Plaster is harder to remove cleanly and costs more to replace. Historic districts like Fairmount and Elizabeth Boulevard often fall into this category, and the rebuild quote reflects working around original millwork and trim.
- HVAC involvement. If mold has reached your ducts or air handler, a full duct cleaning and fogging might add $600 to $2,000. We’ll check this during the inspection. In Fort Worth’s hot, humid summers, condensation inside ductwork is a frequent culprit, especially in homes with attic-mounted air handlers.
- Testing and post-remediation verification. Clearance testing after the job, which gives you a written lab report that mold levels are back to normal, costs $250 to $500. It’s optional. We recommend it for anyone with a medical condition, a pending home sale, or an insurance claim.
How Mold Remediation Is Done (And What You’re Paying For)
Here’s the step-by-step Mold Remediation process our technicians follow on a typical Fort Worth job. The pricing breakdown above maps directly to these steps. We explain this sequence before we start, so you never wonder what’s happening behind a plastic wall.
- Inspection and written estimate. Rick Sumner’s team arrives, inspects the area, and uses moisture meters to map how far water traveled. We find the tide mark, the line water leaves on a wall, and we dry past it. You receive a written price before any work begins.
- Setup and containment. Shoe covers go on at the door. Drop cloths cover the floor before the first piece of equipment comes in. If containment is required, we seal the work area with 6-mil plastic and set up negative air pressure so mold spores don’t drift into the rest of your house.
- Source correction. The leak that fed the mold must be fixed. If it’s a plumbing issue, we’ll coordinate with a licensed plumber. If it’s a grading or drainage problem outside, we’ll document it so you know what a landscaper needs to address.
- Removal. Affected drywall, insulation, and carpet are cut out and bagged. Hard surfaces like framing are HEPA-sanded, wire-brushed, or dry-ice blasted. Every surface is then HEPA-vacuumed. Nothing is just painted over.
- Antimicrobial treatment and drying. EPA-registered antimicrobial treatment is applied to all affected wood and concrete. Then Dri-Eaz dehumidifiers and Phoenix air movers run until moisture readings are back to the Fort Worth norm for your home’s construction type.
- Clearance and cleanup. If you’ve chosen clearance testing, an independent lab verifies the air is clear. We take a photo of the clean-up before the crew leaves, so you see exactly what was done and how it was left. Drop cloths come up. Shoe covers come off at the door.
- Repairs. Depending on what was removed, we rebuild. New drywall, paint, insulation, trim. The goal is that you can’t tell we were there, except that the mold is gone and the room looks like it should.
For a deeper walkthrough of what the full process looks like in a Tarrant County home, see our Mold Remediation in Fort Worth page.
How to Save on Mold Remediation
You don’t save money by waiting. Mold that starts as a $600 bathroom patch can become a $4,500 drywall replacement if moisture keeps feeding it through a Texas summer. The cheapest remediation is the one you catch early.
Beyond that, here’s where Fort Worth homeowners find real savings:
- Combine testing and remediation. Some companies charge separately for inspection and remediation. At Tidemark, the estimate is free. You’re not paying for a separate inspection before you know what the job will cost.
- Ask about containment scope. For small, contained areas under 10 square feet, full negative-air containment may not be needed. We’ll tell you honestly. We won’t charge for a containment chamber you don’t need.
- Address the water source before we arrive. If you’ve already fixed the leak or the roof, the job moves faster. Faster jobs cost less.
- Get a written price and stick with it. The biggest “unexpected” cost in mold remediation is a final invoice that doesn’t match the quote. At Tidemark, you get a written price before work starts. No surprises on the final invoice. That’s not a discount. It’s a standard.
- Take the free estimate. You can call (682) 703-9856 right now. A real person answers, 24/7. You’ll get a straight answer about what your job might cost and whether it’s worth a visit. The visit and estimate cost you nothing.
Is Mold Remediation Covered by Insurance in Fort Worth?
Sometimes. Homeowner’s insurance in Texas typically covers mold remediation only when it’s the direct result of a covered water event. A burst pipe that flooded a wall and led to mold? Usually covered, minus your deductible. Mold from high bathroom humidity, slow window condensation, or a roof leak that’s been ignored for two years? Generally not covered.
Read your policy’s mold endorsement carefully. Most Texas policies cap mold coverage at $5,000 to $10,000, even when it is covered. That cap often includes testing, remediation, and reconstruction, which means the check can run out before the rebuild is finished. We work with your insurer directly. We document everything, provide itemized invoices, and take photos at every step, which is exactly what adjusters need to process a claim without friction.
How Much Does Mold Remediation Cost in Fort Worth by Area?
Here’s how pricing tends to land across different parts of Tarrant County, based on what we’ve quoted on real jobs:
- Bathroom mold (10 – 30 sq ft): $500 – $1,800. Typical when exhaust fans aren’t vented properly, which we see often in 1980s-era homes across Wedgwood and south Fort Worth.
- Kitchen sink or dishwasher leak (cabinetry + drywall): $900 – $3,500. Includes cabinet removal if the base is swollen, and drywall replacement behind the sink.
- Closet back wall mold (from roof leak or window flashing): $700 – $2,400. Common in the old brick homes of Mistletoe Heights and Berkeley Place, where original windows meet Texas thunderstorms.
- Attic mold (full remediation + ventilation correction): $3,000 – $9,500. Ventilation is the recurring issue. Attics in Fort Worth need to breathe, and when they don’t, the underside of the roof deck grows mold.
- Crawl space mold (pier-and-beam homes): $4,000 – $12,000. Includes vapor barrier repair, insulation replacement, and fungicide treatment on all floor joists. Common in Arlington Heights, Ryan Place, and older neighborhoods west of downtown.
- Whole-house duct contamination: $2,500 – $6,000+. When the air handler has circulated mold through the ducts, every room becomes part of the job. We fog and clean the entire system.
The home page has more on how we approach water damage and restoration across the Fort Worth area.
FAQs – Mold Remediation Cost
How much does mold remediation cost in Fort Worth?
Most Fort Worth homeowners pay between $1,800 and $6,500 for residential mold remediation, with $3,400 as a typical mid-range. Small areas under 30 square feet run $500 to $1,800, while crawl space or whole-attic jobs reach $9,000 to $15,000. The written estimate is free, so you’ll know your number before work starts. Call (682) 703-9856 to schedule one.
Is it cheaper to do mold remediation myself?
A DIY Mold Removal attempt with bleach and a scrub brush costs $30 to $80 and usually doesn’t work. Bleach doesn’t penetrate porous surfaces like drywall or wood, so the mold returns. What does work is removing affected material, which is where a professional team with HEPA equipment and containment makes the difference. The most expensive remediation is the one you pay for twice. For a small surface patch on tile, yes, you can handle it. For anything on drywall, insulation, or behind a wall, call us.
How much does black mold removal cost in Fort Worth?
Black mold (Stachybotrys chartarum) removal costs the same as other types: $15 to $32 per square foot of affected area, with typical jobs landing between $2,500 and $8,000 once containment and testing are included. The price isn’t driven by the mold species. It’s driven by how much material is affected and where the water came from. Our process is the same regardless of what the lab report says, because the goal is the same: remove the mold, fix the moisture, and verify the air is clear.
Does homeowners insurance pay for mold removal?
Texas policies pay for mold remediation only when the mold traces directly to a covered water loss, like a burst pipe or an appliance failure. Even then, coverage is usually capped at $5,000 to $10,000. Humidity-related mold, condensation mold, and mold from neglected roof leaks are typically excluded. We’ll help you document the claim and communicate with your adjuster. The estimate itself is free, so call (682) 703-9856 and we’ll walk you through what your policy likely covers.
How long does mold remediation take?
A typical Fort Worth mold job takes 1 to 3 days of active remediation work, plus 1 to 5 days of drying time if structural moisture is present. A small bathroom patch might be done in a single day. A crawl space with full containment, insulation replacement, and clearance testing takes the better part of a week. We’ll give you a timeline on the written estimate, and we stick to it.
Can you come today for a mold problem in Fort Worth?
We answer the phone 24/7 with a live person, not a voicemail. For active water leaks turned mold, we can often get a technician to your home the same day or next morning. The Mold Inspection & Testing and written estimate are free. You’ll know what the job costs, what we’ll do, and how long it will take before you commit to anything. Call (682) 703-9856 now.
Get Your Free Mold Remediation Estimate in Fort Worth
You don’t have to guess what mold remediation costs in your home. One call to Tidemark Water Damage Fort Worth gets you a technician who finds the tide mark, explains what needs to happen, and puts the number on paper before any work begins. That’s not a sales pitch. It’s how we’ve operated since 2006.
Our crews arrive in uniform, with shoe covers at the door and drop cloths under every piece of equipment. We use pet-safe products where there’s a choice, and we run equipment on lower-decibel settings during school hours and nap time. When the job’s done, you get a photo of the clean-up and a 365-Day Done Right Promise that means what it says: if it’s not done right, we make it right.
Call (682) 703-9856. A real person will answer, any hour, any day. You’ll get a free estimate and a straight answer.
Pricing reflects the Fort Worth market as of 2026. Tidemark Water Damage Fort Worth offers free estimates – call (682) 703-9856.
Written by Rick Sumner, Owner at Tidemark Water Damage Fort Worth, serving the Fort Worth area since 2006.
What Our Customers Say
"Flooded laundry room. They set up fans but were thoughtful about the noise around the baby's room and moved equipment when I asked. Kind, clean, and they checked in daily."
- Marcus Delacroix"Pipe burst in the wall and soaked the hallway. The crew was calm and reassuring, careful moving our things to dry spots, and sealed off the clean rooms with plastic. A real comfort during a mess."
- Adeline Soto"Dishwasher leaked under the floor for a while. They found the hidden moisture, dried it without tearing up more than they had to, and left the kitchen clean and treated. Gentle with the whole process."
- Gary Linden